Misc Parts:
Index
-Electronic Controls
-Tempering Valves & Mixing Valves
-Gauges
-Tools and Trade Accessories
-Boiler Parts

Electronic Controls:

	Aquastat Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks, and other applications where temperature control is required. (Does not include Copper Immersion well)	AQ001 $78.34
	Strap-On Aquastat Various electrical components used on outdoor woodstoves or inside the buildings being heated	AQ003 $79.36
	Copper Immersion Well  1/2 in NPT, Bulb Dia 3/8 In, Max Insertion/Bulb Length 3 In, Insulation Depth 3 In, Accessory for Controls, Includes Mounting Clamp	IW1203 $13.99
	Ranco ETC-112000-000 Electronic Temperature Control single stage sensor, range –30 F to +220 F, Differential of 1 F to 30 F, Power 24 vac. Class 2, output SPDT Relay. Commonly used for heating pools and spas.	AQ002 $82.21
	Line-Volt Thermostat Sku Commonly used on space heaters and electric base board heater 115 v	TH002 $32.91
	Low-Volt Thermostat Used for controlling temperatures in buildings be heated	TH001 $26.51
	1" SW. 3-Way Zone Valve Sku:ZV013 3/4" SW 3-Way Zone Valve Sku: ZV343 Various electrical components used on pools or spas and inside buildings being heated.	1" ZV013 $94.17 3/4" ZV343 $90.76
	Zone Valve 3/4" Sweat Honeywell manual opener for operation upon power failure; High torque constant speed motor operates valve on command of a 2-wire thermostat.	ZV342 $82.97
	Transformer	TR11024 $14.21
	Control Center/ Fan Controller	FC8285 $32.23
	Laminated Solenoid Replacement for most outdoor wood furnaces	LS101 $25.67
	1-Zone Switch circulator Pump Relay Switching Relay with internal transformer, for switching one line voltage load. Application Provide intermediate switching of a line voltage device form a low voltage controller.	SR501 $68.53
	Model FS-2 Vane Flow Switch	DFS01 $60.46

Jump to top of page

Tempering Valves & Mixing Valves:

	Cash Acme HeatGuard 110-HX Tempering Valve Temperature Actuated mixing valve that mixes hot water with cold to deliver tempered water at a controlled temperature to 176°F (80°C) maximum. High flow rate design for lower pressure losses within the system. Robust, low complexity construction. Integral union connections on all three ports. Easy and quick to install and service. Sizes (base valve): 3/4" Size (fittings): 3/4” and 1” Not for Domestic Use!	MV34S 3/4" Swt $126.50 MVH01S 1" Swt $151.67
	Cash Acme HeatGuard 110-D Tempering valve Temperature actuated mixing valve that mixes hot water with cold to deliver tempered water at a controlled temperature to 120°F (49°C) maximum. The HeatGuard® 110-D is designed to assist in the prevention of scalding. Sizes (base Valves): 3/4" Sizes (fittings): 3/4” and 1”	MV34S 3/4" Swt $114.18 MV01S 1" Swt $137.76
	Cash Acme HeatGuard 115-H Our 115-H TMV features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. The valve also greatly reduces the outlet flow in the event of a cold water supply failure. The 115-D also features an adjusting handle that can be locked at a desired temperature. Alternatively it can function in an adjusting mode, with the handle clearly marked to indicate the direction to turn to achieve hotter or colder water temperatures. Sizes (base valve): 1" Size (fittings): 1” Not for Domestic Use!	MVL01H 1" Swt $270.73

Jump to top of page

Gauges:

	Dial Thermometer Short Stem Length 1 3/4", Temperature Range 32 to 250 Degrees Fahrenheit, 2.5" Face, Center Black Mount, 1/2" NPT Thread	TG101 $16.88
	Tridicator - Honeywell Sparco Non-corrosive Valox case, 1/2" NPT connection, Graduation from 60° to 320°, Max Pressure: 75 PSI	TPG12 $20.59
	Pressure Gauge Gauge	PG101 $26.33
	Sharkbite Tempeture & Pressure Gauge	$
	Stainless Steal Dry Wellal Dry Well	DW12 $20.31
	Monitor Supply & Return Water Temps	WTG01 $64.90

Jump to top of page

Tools and Trade Accessories:

	Compact Crimp Tool: 3/8" x 1"  PCT0138 1/2" X 3/4" PCT1234 Used for crimping pex line	PCT0138- $33.88  PCT1234- $33.88
	Pex Waterline Kwik Cutter	PKK01 $19.32
	90 Degrees F, Sensor Element: Bimetal, Voltage: 20 To 30 Vac Mounting: Vertical, Note: Switch Is Located	TH001 $197.55
	Monitor Supply & Return Water Temps Water Temps You can monitor the supply & return water temps with just one wireless device. Yes I did say wireless, the receiver goes where you would like it, and the sending unit in the basement or on the boiler.	WTG01 $64.90
	Teflon Tape (white)   1/2” x 520” Low density, .35 Mil thick for thread sealing Iron Stainless Steel, Copper, Brass, Glass & Rubber. Use on all thread to assure a watertight connection, self lubricates joints, making them easy to assemble and disassemble.	TFW12 $0.49
	Teflon Tape (Pink) Extra Heavy Duty  1/2” x 260”, 3 mil thick for water lines. Use on all thread to assure a watertight connection, self lubricates joints, making them easy to assemble and disassemble.	TFP12 $1.99
	Infrared Laser Thermometer Simply press the trigger to measure temperatures, Instant Readings in F or C, Large bright LCD with Backlight, Measures Temperature without contact, Laser pointer for accurate aim, Measures –58f to 1022f, Check for Hot / Cool spots, Accurate up to 5’ feet away.	LT001 $64.90
	Alternative Heating & Supplies Boiler Treatment Kit For sale as a kit or individual sale	A200Kit $74.95
	CorQuest 1200 Corrosion and Scale Inhibitor prevents metal corrosion, scale, and rust build-up on the heat exchange surfaces to prolong equipment life and improve efficiency. 1/2 gallon treats 150 gallons of water or one gallon treats a 300 gallon system.	BT012 $37.44 per gallon BT112 $21.70 per 1/2 gallon
	Cash Acme SharkBite Kit Fittings line presents a revolutionary solution to connecting water distribution pipe. Our Sharkbite push-fit fittings are the fastest, easiest way to join copper, CTS, CPVC, and PEX pipe in any combination. No soldering, clamps, unions, or glue. Certified to 200psi and 200° (93°C) Includes 2 Each Includes 1 Each 1/2" straight coupling 1/2" tee 3/4" straight coupling 3/4" tee 3/4" reduced coupling 1/2" end stop 1/2" female connector 3/4" end stop 3/4" female connector 1/2" de mount clip 1/2" male connector 3/4" de mount clip 3/4" male connector 1/2" disconnect tongs 1/2" elbow 3/4" disconnect tongs 3/4" elbow depth gauge/de burr tool	SBCKit $269.62

Jump to top of page

Boiler Parts:

	HP Boiler Trim-Out Package For use on commercial and residential closed loop hydronic heating systems. Packages include an air separator, a 1/8 in. and 1/2 in. service check valve, float vent, fill valve or combination fill valve and backflow preventer and ET series expansion tank.	HPX30BC $206.05
	Cash Acme AV Series Air Vent Brass construction. No service required. Economical and easy to install. For use in heating systems to vent air trapped within the circulating water. Working pressure 90 -150 psi	AV14 $6.20 AV18 $19.38
	Bronze Combination Fill Valve and Backflow Preventers For use in commercial and residential hydronic heating systems to provide make-up water to the boiler, and prevent backflow when supply pressure falls below system pressure.	BFPRV $108.46
	Boiler Pressure Relief Valve Bronze body, silicone seat disc, stainless steel spring and internals. Test leve is standard. Male inlet and female outlet - 3/4 in, 30 PSI, 510,000 BTU/HR Temperature Pressure Relief Valve Bonze Body, Coated thermal unit, stainless steel spring and internals. 210 F, CSA, ASME, Male inlet and female outlet - 3/4"	PRV34 $17.82 TRV34 $17.82
	Y-strainer 3/4 NPT/1" NPT Is installed in the pipeline wherever small solid particles occupy the main flow of liquids or gases. The Y-Strainer shall be installed so that the screening element is on the lower end of the body, allowing entrapped material to collect in it. The removable cap shall be detached periodically to clean and maintain the mesh screen	YS34 $18.06 YS01 26.28
	Air Flow @ 0.000 Inch Static Pressure 148 CFM, Speed 3160, Voltage Rating 115 Volts, Current Rating 1.37 Amps, Frequency 60/50 Hertz, Thermal Protection Auto, Wheel Diameter 3 13/16 Inches, Wheel Width 2 1/2 Inches, Inlet Diameter 3 1/8 Inches, Air Flow @ 0.100 Inch Static Pressure 141 CFM	FN446 $79.58
	Air Flow @ 0.000 Inch Static Pressure 148 CFM, Speed 3160, Voltage Rating 115 Volts, Current Rating 1.37 Amps, Frequency 60/50 Hertz, Thermal Protection Auto, Wheel Diameter 3 13/16 Inches, Wheel Width 2 1/2 Inches, Inlet Diameter 3 1/8 Inches, Air Flow @ 0.100 Inch Static Pressure 141 CFM	FN004 $81.52
	PSC Blower, Forward Curve, Direct Drive, Wheel Dia 3 In, CFM @ 0.000-In SP 50, Voltage 115, 60 Hz, Single Phase, Full Load Amps 0.23, RPM 3036, Max Inlet Temp 104 Deg F, Overall Height 5 13/16 In, Overall Width 5 1/8 In, Overall Depth 6 7/16 In, Includes Discharge Mounting Flange and Inlet Cover.	FN1TDN7 $64.95
	PSC Blower, PSC Blower,115 Forward Curve, Direct Drive, Wheel Dia 3 15/16 In, CFM @ 0.000-In SP 75, Voltage 115, 60 Hz, Single Phase, Full Load Amps 0.45, RPM 3016	FN1TDP3 $62.87
	Snap Disc High Temp Control Over heating controller	SD001 $12.87
	Damper Actuators GMA221.1u OpenAir GMA Series, 24 Vac/dc and 120 Vac, 62 lb-in, Spring Return, Direct-Coupled Electronic Damper Actuators. The OpenAir direct-coupled, spring return electronic damper actuators provide modulating, two-position and three-position contol of building HVAC dampers	DA221 $204.33
	Infrared Laser Thermometer Simply press the trigger to measure temperatures, Instant Readings in F or C, Large bright LCD with Backlight, Measures Temperature without contact, Laser pointer for accurate aim, Measures –58f to 1022f, Check for Hot / Cool spots, Accurate up to 5’ feet away.	LT001 $64.90
	Air Purgers Air Purgers are specially designed to eliminate air from systems by entraining air to the top of the unit and venting through an air vent. The Cash Acme Air Purgers feature a one piece cast iron construction. No service is required. Applications: For use in heating systems to trap entrained air from the circulating water.	AP01 AP114 $19.36

Jump to top of page

	3/4 Sw. Tempering Valve Sku: TV034 Valves for copper pipe. Used to tempering domestic hot water.	$48.00
	Snap Disc High Temp Control Sku: SD001 Over heating controller	$12.87